Overview of Galvanized Steel Sheet & Plates
Galvanized Steel Sheet & Plates, are intended for use where greater corrosion protection is required without painting. A lower cost alternative to stainless steel, galvanized sheet and plates have a rust free protection for up to 30 years, while maintaining strength with a durable surface coating. JINDALAI STEEL stocks many sizes in precut sizes, full mill sizes or we can hot dip virtually any size and quantity required for your welding or construction project.
Galvanized sheet / plate can be cut, machined or welded by common methods used for regular steel, but adequate ventilation should be used to avoid inhalation of fumes when heated. Sheared edges are not galvanized and can be treated with a cold galvanizing paint to maintain protection if desired.
Specification
HOT-DIP GALVANIZED STEEL COIL/SHEETS | ||||
ASTM A792M-06a | EN10327-2004/10326:2004 | JIS G 3321:2010 | AS-1397-2001 | |
COMMERCIAL QUALITY | CS | DX51D+Z | SGCC | G1+Z |
STRUCTURE STEEL | SS GRADE 230 | S220GD+Z | SGC340 | G250+Z |
SS GRADE 255 | S250GD+Z | SGC400 | G300+Z | |
SS GRADE 275 | S280GD+Z | SGC440 | G350+Z | |
SS GRADE 340 | S320GD+Z | SGC490 | G450+Z | |
SS GRADE 550 | S350GD+Z | SGC570 | G500+Z | |
S550GD+Z | G550+Z | |||
THICKNESS | 0.10MM--5.00MM | |||
WIDTH | 750MM-1850MM | |||
COATING MASS | 20g/m2-400g/m2 | |||
SPANGLE | REGULAR SPANGLE,MINIMIZED SPANGLE,ZERO SPANGLE | |||
SURFACE TREATMENT | CHROMATED/NON-CHROMATED,OILED.NON-OILED, ANTI FINGER PRINT | |||
COIL INNER DIAMETER | 508MM OR 610MM | |||
*HARD QUALITY GALVANIZED STEEL(HRB75-HRB90) AVAILABLE ON CUSTOMER'S REQUEST(HRB75-HRB90) |