Properties Of The Aluminum Circle
● Aluminum circle is suitable for many markets, including cookware, automotive and lighting industries, etc., thanks to good product characteristics.
● Strong mechanical properties.
● High and homogeneous heat diffusion.
● Ability to be enameled, covered by PTFE (or others), anodized.
● Good reflectivity.
● High strength-to-weight ratio.
● Durability and resistance to corrosion.
Quality Control
● Assurance Below inspection will be done in the production.
● a. ray detection—RT.
● b. ultrasonic testing—UT.
● c. Magnetic Particle Testing-MT.
● d. penetration testing-PT.
● e. eddy current flaw detection-ET.
1) Be free from Oil Stain, Dent, Inclusion, Scratches, Stain, Oxide Discoloration, Breaks, Corrosion, Roll Marks, Dirt Streaks, and other defects which will interfere with use.
2) Surface without black line, clean-cut, periodic stain, roller printing defects, such as other gko internal Control standards.
Al Alloy
● 1xxx ( 1000 )Series: 1050, 1060, 1070, 1100( aa1100 ), 1200
● 3xxx ( 3000 )Series: 3003, 3004, 3020, 3105
● 5xxx ( 5000 )Series: 5052, 5083, 5730
● 6xxx ( 6000 )Series: 6061
● 7xxx ( 7000 ) Series: 7075
● 8xxx ( 8000 ) Series
Temper
O – H112: HO, H24, T6
Sizes ( diameter/length)
● Small Sizes: 10mm, 12mm, 18mm, 19mm, 20mm, 22mm, 25mm, 30mm(3cm), 32mm, 35mm(3.5cm), 36mm, 38mm ( 3.8 cm ), 40mm ( 4cm ), 44mm, 70mm, 75mm, 80mm(8cm), 85mm, 90mm, 100 mm, 115mm, 180mm, 230mm ( 1 inch, 1.25 inch, 1.5 inch, 3.5", 4 inch ).
● Large Sizes: 200mm(20cm), 400mm, 600 mm, 1200mm, 2500mm ( 12", 14 inch(14"), 26 inch, 72 inch ).
Thickness
1.0mm, 1.5mm, 2.0mm, 2.5mm, 3mm, 4mm, 1/4" thick ( 3/16 inch )
Technique
DC grade, CC grade
Surface Treatment
● Anodized: anodizing in the surface
● Sublimation: handysub dye sublimation, white sublimation, double sided sublimation
● Induction: with bonded full induction base disk
● Mirror: reflective mirror finish, bright finish
● Colored Coating: default silver
● Powder Coated
● Brushed
● Printed
Detail Drawing
